If you’re like most people, you have two operating systems that you use on your computer: Windows and your favorite gaming platform, such as SteamOS or Linux. But what if you want to use both operating systems at the same time? There are a few ways to do this. The easiest way is to install Windows on a separate hard drive and boot from it. This is the method we’ll be using in this article. First, make sure that your computer has at least 4GB of free space on its hard drive. You’ll also need an installation disc for Windows or a USB drive with the Windows installer on it. If you’re using a USB drive, make sure that it’s formatted as FAT32 or NTFS. Next, insert the installation disc or USB drive into your computer and turn it on. When the computer starts up, press any key to boot from the disc or USB drive. If you’re using a USB drive, wait until the system asks if you want to start Windows from the disk (usually after about 5 minutes). Then press “Yes” to start Windows from the disk. Windows will start up and ask which operating system you want to use: Normal (Windows 8/10) or UEFI (Windows 7/8/10). If you’re using a USB drive, Windows will automatically boot into UEFI mode and ask which operating system to use. If you’re using an installation disc, choose “Normal” and continue with step 5 below. Press “Enter” to choose UEFI mode . If you’re using a USB drive , continue with step 6 below . ..

Valve’s SteamOS is a living-room gaming operating system based on desktop Linux. It’s currently in beta, but you can install it yourself on almost any computer thanks to Ye Olde SteamOSe, a modification of the SteamOS installer.

Important Note: We tested this ourselves, but we’re using an unofficial modification of a beta operating system here. Before doing this, ensure you have back ups. You do this at your own risk — you could run into problems.

Why We Recommend Ye Olde SteamOSe

RELATED: 8 Things the Alpha Release Tells Us About SteamOS’s Linux System

So why are we recommending Ye Olde SteamOSe, an unofficial third-party “respin” of the SteamOS installer rather than Valve’s official installer? Well, SteamOS is currently in beta — although it feels more like an alpha — and Valve appear to be focusing on their official Steamboxes. The official installer will eventually become the best option, but here are some current limitations Ye Olde SteamOSe solves:

SteamOS requires a computer with UEFI. The unofficial respin supports both UEFI and traditional BIOS. SteamOS claims to require 500 GB of hard disk space. The unofficial respin has more realistic space requirements of about 40 GB. SteamOS only officially supports NVIDIA graphics. The unofficial respin should include more graphics support, including for Intel, AMD, and even VMware and VirtualBox graphics. At the moment, 3D acceleration is only working inside VMware, not VirtualBox. SteamOS takes over your entire computer. The unofficial respin can dual-boot with Windows. Its installer includes support for resizing Windows NTFS partitions to make this happen. SteamOS networking is limited to Realtek hardware or firmware-free networking. The unofficial respin includes typical Linux networking drivers, including Wi-Fi support. SteamOS only supports HDMI audio output. The unofficial respin supports almost any sound card.

You can attempt to install Valve’s build of SteamOS, but unless you have a fairly specific hardware configuration, it just won’t work without some tweaking. Ye Olde SteamOSe’s developer, directhex, has done this tweaking work for us and packaged it up.

Start Installing SteamOS

First, visit the Ye Olde SteamOSe page and download the installer disc image with a BitTorrent client. As SteamOS is freely redistributable, this is entirely legal.

Burn the ISO image file to a DVD and boot your computer from the disc. If you’d rather use a USB flash drive instead of a DVD, use Win32 Disk Imager to write the ISO image to the USB drive and create a bootable USB drive.

When you boot from the disc, you’ll see the boot menu. This is a customized version of Valve’s SteamOS boot menu. The Power User install (custom partitions) option here is specific to Ye Olde SteamOSe and will allow you to resize your existing partitions and set up a dual-boot system.

Very Important: You must select the Power User install option to set up a dual-boot system. Selecting the Automated install option will wipe your entire first hard disk, erasing any Windows system or files on it and installing SteamOS over the empty space.

Partition Your Hard Disk

The Power User install option will put you in the SteamOS installer, which is actually a customized version of the Debian Linux installer. Much of the installation process will happen automatically, but the process will stop once you reach the Partition disks screen.

Select the Manual option and click Continue to start partitioning your disk. If you select the Guided – use entire disk option, your hard disk will be wiped and SteamOS will use the entire disk.

Select your Windows NTFS partition and click Continue to resize it, which will make space for SteamOS.

If you have a second hard drive you want to install SteamOS on, you should be able to choose the second hard drive here and create partitions on it instead of resizing an existing Windows partition.

Select the Resize the partition option and click Continue.

You’ll be asked whether you want to write any previous changes you made to disk. If you’ve been following this process, you haven’t made any changes so you can select Yes and continue.

Enter a smaller size for your Windows partition to shrink it and free up space for your SteamOS system. Be sure to leave enough space for Windows, but also provide enough space to Steam OS.

Select the “FREE SPACE” you created and continue. We’ll now create several different partitions for SteamOS.

First, we’ll create a partition for the SteamOS base system. Select the Create a new partition option and enter a partition size. Valve uses a 10 GB partition for this, but directhex says you can use a 3 GB partition at absolute minimum.

We recommend making this a Primary partition and place it at the Beginning of your free space when asked.

Ensure the partition is set to “Use as: Ext4” and “Mount point: /”. These options should be automatically selected.

Select the Done setting up the partition option and click Continue when you’re done.

Second, we’ll create a swap partition. This is basically the same thing as the pagefile on Windows. Select the free space again, click Continue, and enter a partition size. Valve uses 10 GB for this, but directhex says you only need a gigabyte or two. This will actually depend on how much RAM you have in your computer and what games you’ll be playing — if you’re installing SteamOS on an old computer with little RAM, you may want to create a larger swap partition.

We recommend making this a Logical partition and placing it at the Beginning of the free space when asked.

Select the Use as: option and set it to Swap area. When you’re done, select Done setting up the partition and click Continue.

Third, we’ll create a recovery partition for SteamOS’s recovery feature. Select the free space again and create another partition in the same way as above. Valve uses 10 GB for this partition as well, but directhex says you can probably use 3 GB at an absolute minimum.

Ensure the partition is set to “Use as: Ext4.” Select the Mount point option and click Continue to set up a mount point. Click Enter manually  and click Continue to enter a custom mount point.

Enter /boot/recovery as the partition’s mount point. Select Done setting up the partition and click Continue again when you’re done.

Fourth, and last, we’ll create the partition where SteamOS installs games. You should make this as large as possible, as you’ll need the most space here.

Select the free space again and click Create a new partition. You can select the default partition size to use the remaining free space for your games partition.

Set the partition to “Use as: Ext4” and “Mount point: /home”. The installer should choose these options automatically. When you’re done, continue.

Your SteamOS partitions should now resemble the ones in the screenshot below. Select Finish partitioning and write changes to disk when you’re done.

After confirming the changes, the rest of the installation process should happen automatically.

The installer will ask you about setting up a dual-boot setup with the GRUB boot loader. Click Yes and allow it to continue.

After installing SteamOS, you’ll see a boot menu each time you boot your computer. This will allow you to choose whether you want to boot into SteamOS or Windows. Use the arrow keys and Enter to select an operating system.

The boot menu will be themed to match the rest of SteamOS after you complete the rest of the process below.

Post-Install Setup

You’re not actually finished the setup process yet. After booting into SteamOS the first time, you’ll see a login screen. Log into the system with the account name “steamos” and the password “steam”. Select the GNOME session.

On the SteamOS desktop, click the Activities option, select Applications, and open a Terminal window.

Type “steam” into the terminal and press Enter to run Steam. Accept the EULA and allow Steam to set up the system.

You don’t actually need to sign into Steam yet. You can close the window when you’re asked to sign into your Steam account.

After the process completes, log out of the desktop by clicking the steam account option in the upper-right corner of the screen and selecting Log Out.

Next, log in with the account name “desktop”, the password “desktop”, and the GNOME session.

Open a Terminal window in the same way as before. Type the following command into the terminal and press Enter:

Enter the password “desktop” when prompted. The script will set up SteamOS and automatically reboot the computer into the recovery partition utility, so just let it run.

(We’re not sure what was going on with the graphics when we took the screenshot below, but everything seemed to work out okay. This is just a very beta experience.)

Type “y” and continue to create the recovery partition.

You can now reboot into SteamOS.

Using SteamOS

SteamOS should now be working normally. It will boot up in a more polished way with a progress bar. When it boots up, you won’t see any old Linux login screen — you’ll see the same SteamOS experience you’d get on a new SteamBox.

Log in with your Steam account to use SteamOS. All your games that support Linux will be available to download and play.

If you’d like to access the desktop again, go to Settings > System > Enable access to the Linux desktop. You can then select the Exit option and choose Return to Desktop.

SteamOS doesn’t yet provide good official support for a variety of sound cards. You’ll need to run the PulseAudio Volume Control (pavucontrol) application from the desktop’s Activities menu and use it to select your sound card and system volume levels. The volume control integrated into the GNOME desktop won’t work with Ye Olde SteamOSe at this time.

Ye Olde SteamOS primarily functions as a modification to the SteamOS installer, adding additional installation functionality and packages that aren’t present in the official distribution of SteamOS. Your SteamOS system should now automatically update from the official SteamOS repositories, just like an official Steambox. It does this in the background using standard Linux package management tools — SteamOS is very similar to standard desktop Linux systems.

Over time, this process will become much simpler. One day, Valve will provide their own easy installer that will support a wider variety of hardware and easy dual-boot setup. For now, we have to jump through these hoops — but it’s better than not being able to run SteamOS at all.

Thanks to directhex for creating the Ye Olde SteamOSe respin and doing all this work!